autmay

Jaw Crusher is mainly used to crush kinds of mining stones primarily, and the largest compression resistance of the Gold mining equipment for sale material is 320MPa. The jaw crusher is widely used in stone mining, metallurgy industry, building material, highway, railway, and chemical industry.

Working Principle of Jaw Crusher:

The motor transmits power through belt, drives the moving jaw to do periodic motion towards the fixed jaw by the eccentric shaft. The angle between toggle plate and moving jaw plate increases when moving jaw moves . So the moving jaw moves towards the fixed jaw. The stuff will be crushed in this process. The angle between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw moves leaves fixed jaw by pulling rod and spring, the final crushed stuff will be discharged from the outlet

LM-series vertical mill is one advanced mill, adopting top technology domesic and abroad, and based on many years’ mill experiences. It can crush, dry, grind, and classify the materials.

LM series vertical milling machine can be widely used in such industries as cement, power, metallurgy, chemical industry, non-metallic mineral. It is used to grind granular and powdered materials into powder with required fineness.

Main Advanced Features of LM vertical mill:

1. Low Investment Cost
This mill itself can crush, dry, grinding, classifying, so the system is simple, and occupation area is about 50% of ball mill system. In addition, Kaolin grinding mill can be installed outside, so it will reduce a large number of investment costs.
2. Low Operation Cost
⑴ High efficiency: roller compacted materials directly onto the grinding disc, so power consumption is low. Compared with ball mill, it saves energy consumption by 30% ~ 40%.
⑵ Less wear and tear: As the roller is not in direct contact with the disc, and material of the roller and liner is high quality, so life lime is long.
3. High Drying Ability
As the hot air inside contacts directly with the material, drying ability is higher, and it saves energy. By regulating the air temperature, it can meet requirements with diffirent humidity.
4. Simple and reliable operation
⑴ It is equipped with automatic control systems, so remote control makes it easy to operate.
⑵ It is equipmented with one device,which prevents the roller from contacting with the liner directly, and avoids the destructive impact and severe vibration.
5. the stability of product quality
As the material stays in the Copper mining equipment for sale mill for a short time, it is easy to detect and control the product particle size and chemical composition, to reduce duplication of milling, stable product quality.
6. Maintenance convenience
By reparinging fuel tank, rotating the arm, it is fast to replace the roller sleeve, and liner, and reduce the downtime loss.
7. Environmental protection
It is with small vibration, low noise, and the overall sealing. The system works under negative pressure, so there is no dust going out. It meets the requirements of the state Environmental Protection.

Ore crusher
Ore crusher include metal ore crusher and non-metallic ore crusher.Ore crusher and ore grinder mill are applied widely in mining industry and other mobile cone crusher related industries also. Ore crusher and ore grinder mill is widely used in many industrial fields, such as building, chemical, chemical fertilizer, metallurgy, mining, nonmetal, abrasive, bearing materials, ceramic, steel, thermal power, bricks & tiles, coal industry, etc. The typical crushing or grinding materials are cement (raw meal and cement clinker), shale,slag,coke, sodium feldspar, Syenite, limestone, graphite, fluorite,car amide, electrolytic manganese metal, ferromanganese, coal, gangue, zirconium, steatite, granite, orthoclase, marble, glass, etc.
Features and Benefits of mobile cone crusher station :
integrated machine set;
high flexibility;
lower transportation cost;
high efficiency ;
easy to adjust and to collocate;
reliable performance and conveninet maintainacee
Technical advantages of gold ore crusher

Good mobility:
SBM mobile cone crusher has high chassis and small turning radius, which is suitable for road transportation, especially for driving to crushing sites that are difficult to access. The preparation time of the mobile crushing plant are greatly reduced, compared with the fixed one.
Greatly reduce material transportation cost:
SBM Y series mobile crushing plant crush the material on crushing site, without transporting the materials for off-site crushing.
Combination is flexible for construction :
According to different customers’ requirements, SBM Y series mobile crushing plant can be operated as independent units, or as two-stage crushing plant with primary and secondary crushing, or as three-stage crushing plant with primary, secondary, and tertiary crushing. Likewise, Y series mobile crushing plant can be easily adjusted to suit the crushing application by choosing feeding to crusher or feeding to screen options.
Reliable performance and convenient maintenance:
Y series mobile crushing plant adapt excellent quality crusher, screen and feeder. Normal belt conveyor can be used for conveyance of material, which is of mature technology, simply operation, easy maintenance, and low investment.
Customized production and flexible configuration :
We can provide special mobile crushing plant based on customers’ crushing site,coal crusher material, and particle shape requirements, etc. Such as self-load belt conveyor, multiple machines combined type, single machine type and so on.

Copper prices got an unexpected boost, Tuesday, due to the release of data showing that China’s refined copper imports rose 21.5 percent over February levels. The cement grinding mill manufacturing process news sent copper prices up 0.3 percent, a slight rise, however, the increase was not enough to offset February’s 36 percent decline. On Monday, copper plunged the most in seven weeks on the LME, over concerns that China, the world’s largest copper consumer, would step up monetary tightening in efforts to cool the economy. In Shanghai, the most popular copper contract, for July delivery, settled about 0.7 percent lower at the close of trading.

Despite the red metal’s recent rut, analysts and mining giants remain bullish on the metal’s near and long term prospects. This was evident yesterday, when gold miner Barrick Gold Corp (NYSE: ABX) announced that it would purchase of copper producer Equinox Minerals (TSE:EQN, ASX:EQN). Barrick’s bid trumped China’s Minmetals Resources Ltd. $6.5 billion offer to Equinox. Barrick bid a surprising $7.7 billion, 17 percent more than Equinox’s average share price over the last 20 days of trading. Due to terms of the agreement, Equinox will drop its bid for Canadian copper and zinc producer Lundin Mining Corp (TSE:LUN).

Barrick’s purchase of Equinox will give the gold miner exposure to copper through various assets, including Equinox’s Lumwana mine in Zambia. The deal would be the second-largest acquisition by Barrick, after its $10.2 billion purchase of Placer Dome Inc. Barrick will fund the deal via credit and cash including a $5 billion credit facility, underwritten by Royal Bank of Canada and Morgan Stanley. Barrick also has an existing $1.5 billion credit facility and $4 billion of cash as of Dec. 31.Commenting on the purchase, founder and chairman of the board Peter Munk announced that Barrick was not trying to become a diversified miner and copper is the only non-gold metal where it desires significant expansion, a clear indication that that the copper market is poised for some impressive gains.

Last week, Japan released data that give an insight into how much the earthquake and tsunami hurt copper consumption. Japan’s output of rolled copper product slid 3.7 percent in March from the same month last year, its biggest fall in 17 months. Seasonally adjusted output totaled 68,620 tonnes in March, down 2 percent from February, preliminary data from the Japan Copper and Brass Association showed on Tuesday. “We’ll see a more Gold mining equipment for sale direct impact of the plunge in Japanese car production in the coming months as there is usually a time lag of one or two months between copper production and car output,” according to an  industry official said. Industrial output will likely remain low in the next few months but recover gradually towards the summer as industrial activities restart, and the country commences rebuilding efforts.

Company news

First Nickel Inc. (TSE:FNI) will restart ore production at its Lockerby nickel/copper mine in the third quarter of this year, with a ramp-up to full production of 10 million pounds of nickel and seven million pounds of copper per year by mid-2012. First Nickel idled production  in October 2008, when the worldwide recession hit and the price of nickel dipped beneath $4 a pound.

Freeport-McMoRan Copper & Gold Inc. (NYSE:FCX), will pay a one-time 50-cent-a-share dividend and raised its 2011 sales forecast as the industrial metal traded close to a record. The world’s largest publicly traded copper producer announced that first-quarter net income climbed 67 percent to $1.5 billion, or $1.57 a share, from $897 million, or $1, a year earlier. Sales gained 31 percent to $5.71 billion from $4.36 billion. Freeport, forecast full-year copper sales of 3.9 billion pounds and gold sales of 1.6 million ounces, up from its prediction in January of 3.85 billion pounds and 1.4 million ounces respectively.

Capstone Mining Corp‘s (TSE:CS) said first-quarter production at its Cozamin and Minto mines fell 24 percent, due to lower mining rates and ore grades,  however, the company still stands behind its full year production forecast. The company said it produced 16.7 million pounds of Surface mining equipment manufacturer and machinery for sale cost copper in concentrates in the quarter, down from the 22 million pounds it produced a year ago. Capstone expects to produce 80-85 million pounds of copper in concentrates in 2011, as mining begins in the Avoca area in Mexico’s Cozamin and as is increases ore crushing rates at Minto, in the Yukon territory.

Copper prices got an unexpected boost, Tuesday, due to the release of data showing that China’s refined copper imports rose 21.5 percent over February levels. The cement grinding mill manufacturing process news sent copper prices up 0.3 percent, a slight rise, however, the increase was not enough to offset February’s 36 percent decline. On Monday, copper plunged the most in seven weeks on the LME, over concerns that China, the world’s largest copper consumer, would step up monetary tightening in efforts to cool the economy. In Shanghai, the most popular copper contract, for July delivery, settled about 0.7 percent lower at the close of trading.

Despite the red metal’s recent rut, analysts and mining giants remain bullish on the metal’s near and long term prospects. This was evident yesterday, when gold miner Barrick Gold Corp (NYSE: ABX) announced that it would purchase of copper producer Equinox Minerals (TSE:EQN, ASX:EQN). Barrick’s bid trumped China’s Minmetals Resources Ltd. $6.5 billion offer to Equinox. Barrick bid a surprising $7.7 billion, 17 percent more than Equinox’s average share price over the last 20 days of trading. Due to terms of the agreement, Equinox will drop its bid for Canadian copper and zinc producer Lundin Mining Corp (TSE:LUN).

Barrick’s purchase of Equinox will give the gold miner exposure to copper through various assets, including Equinox’s Lumwana mine in Zambia. The deal would be the second-largest acquisition by Barrick, after its $10.2 billion purchase of Placer Dome Inc. Barrick will fund the deal via credit and cash including a $5 billion credit facility, underwritten by Royal Bank of Canada and Morgan Stanley. Barrick also has an existing $1.5 billion credit facility and $4 billion of cash as of Dec. 31.Commenting on the purchase, founder and chairman of the board Peter Munk announced that Barrick was not trying to become a diversified miner and copper is the only non-gold metal where it desires significant expansion, a clear indication that that the copper market is poised for some impressive gains.

Last week, Japan released data that give an insight into how much the earthquake and tsunami hurt copper consumption. Japan’s output of rolled copper product slid 3.7 percent in March from the same month last year, its biggest fall in 17 months. Seasonally adjusted output totaled 68,620 tonnes in March, down 2 percent from February, preliminary data from the Japan Copper and Brass Association showed on Tuesday. “We’ll see a more Gold mining equipment for sale direct impact of the plunge in Japanese car production in the coming months as there is usually a time lag of one or two months between copper production and car output,” according to an  industry official said. Industrial output will likely remain low in the next few months but recover gradually towards the summer as industrial activities restart, and the country commences rebuilding efforts.

Company news

First Nickel Inc. (TSE:FNI) will restart ore production at its Lockerby nickel/copper mine in the third quarter of this year, with a ramp-up to full production of 10 million pounds of nickel and seven million pounds of copper per year by mid-2012. First Nickel idled production  in October 2008, when the worldwide recession hit and the price of nickel dipped beneath $4 a pound.

Freeport-McMoRan Copper & Gold Inc. (NYSE:FCX), will pay a one-time 50-cent-a-share dividend and raised its 2011 sales forecast as the industrial metal traded close to a record. The world’s largest publicly traded copper producer announced that first-quarter net income climbed 67 percent to $1.5 billion, or $1.57 a share, from $897 million, or $1, a year earlier. Sales gained 31 percent to $5.71 billion from $4.36 billion. Freeport, forecast full-year copper sales of 3.9 billion pounds and gold sales of 1.6 million ounces, up from its prediction in January of 3.85 billion pounds and 1.4 million ounces respectively.

Capstone Mining Corp‘s (TSE:CS) said first-quarter production at its Cozamin and Minto mines fell 24 percent, due to lower mining rates and ore grades,  however, the company still stands behind its full year production forecast. The company said it produced 16.7 million pounds of Surface mining equipment manufacturer and machinery for sale cost copper in concentrates in the quarter, down from the 22 million pounds it produced a year ago. Capstone expects to produce 80-85 million pounds of copper in concentrates in 2011, as mining begins in the Avoca area in Mexico’s Cozamin and as is increases ore crushing rates at Minto, in the Yukon territory.

This is a newly developed patent pending oil bottle crusher, specially designed for small batches recycling of the HDPE plastic bottles from auto car maintenance shops and PET bottle crusher for bear and soft drinks. The grinder (granulator) can grind engine oil bottles, lubricant oil bottles, water bottles, and other liquid containers made of plastics. It reduces the size of bottle scraps and retreat residual oil/water.People can benefit from this machine by reduce the size of the scrap oil bottles and retreat residual oil in engine oil bottles. All electric components of this machine are CE or/and UL approved. The machine is made in China and the price of this small shredder is only 3,880 US dollars.

Main Features of Oil Bottle Shredder - Model SB102

Low power consumption
Low noise and low dust
Low operation and maintenance cost
Automatically stop by using a timer in the control box
Affordable price.
This Glass Crusher is ideal for handling up to 24 tons of glass bottles per week. Quickly crushes glass bottles into tiny pieces in a safe and controlled manner. The crushed glass can feed into recommended bin sizes of 37 Gallons (44" x 19" x 22") or 64 gallon containers (45" x 23" x 29").  The user-friendly design makes glass crushing simple and easy.

Note: Specifications, Dimensions & other product details may vary slightly upon delivery due to continuous product progressions and improvement. If exactness is required on any item(s), confirm in writing before ordering. In our efforts to provide products with the most up to date engineering and design, we reserve the right to change specifications, dimensions and other product details without notice.

Performance may vary depending upon application.

Products must be installed and operated according to required standards, codes, regulations and safety procedures.

Densifiers are a staple piece of equipment in the recycling and waste management industries. As the name implies, the purpose of a densifier is to create dense material from lighter materials, to facilitate easier storage and/or handling. Whether the end product is to be used as raw material for manufacturing new products or disposed of, densification of some scrap materials is an indispensable step in recycling, reuse and disposal.

Unlike compactors, which are typically made to handle mixed waste, like office or commercial trash, densifiers are usually designed for a specific material or materials. In addition, densifiers can provide volume reduction ratios as high as 50:1, as compared to a typical ratio of 20:1 in Aluminum ore crusher high-end compactors. This lower ratio is also typical of balers, which are sometimes referred to as densifiers. Balers generally function much the same as compactors, but are usually employed in the processing of one or a few materials, such as cardboard, plastic wrap, bottles and cans.

Various industrial applications call for differences in the type and configuration of densifiers. Application considerations include such details as feed type and rate, heated or non-heated, output type, portability and more. The following information may be of help in determining whether a densifier is right for your particular application and what type would best fit your needs.